|
DMX-8 USB MIXER
Antex Driver and Application
WINDOWS 7 (32 bit),
VISTA (32 bit), and XP
(32 bit)
Date: 12/11/08 File
Name:
DMX8_VistaXP32_A_setup7.5.0.exe
File Size: 5.6 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel Pentium 4 CPU 2.8 GHz or
equivalent, 1GB RAM
Hardware compatibility:
May be used with all DMX-8
serial numbers.
Description: MS Certified Windows 7, Vista and XP driver and
mixer UI. Use this application to change the
configuration of the DMX8 once installed. This will also
install the driver.
WINDOWS 7 (64
bit) and VISTA (64 bit)
Date: 12/11/08
File Name:
DMX8_Vista64_A_setup7.5.0.exe
File Size: 5.7 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel 64-bit CPU or equivalent,
2GB RAM
Hardware compatibility: May be used with all DMX-8
serial numbers.
Description: MS Certified Windows 7, Vista driver and mixer UI. Use this application to change the
configuration of the DMX8 once installed. This will also
install the driver.
XP (32 bit)
Legacy
DMX-8 hardware only
Date: 7/21/06
File Name:
setup4.0.0.exe (6.12Mb)
Certification status:
MS Certified
Support: DMX-8 Mixers under Windows XP w/USB
2.0
Hardware compatibility: May only be used with DMX-8
serial numbers 248700002759 and lower.
DMX-8 USB MIXER
FTR compatible
Driver and Application
WINDOWS 7 (32 bit),
VISTA (32 bit), and XP
(32 bit)
Date: 12/10/08 File Name:
DMX8_VistaXP32_setup7.5.0.exe
File Size: 5.6 Mb
Latest Release
Date: 11/14/08 File Name:
DMX8_VistaXP32_setup7.0.4.exe
File Size: 5.6 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel Pentium 4 CPU 2.8 GHz or
equivalent, 1GB RAM
Hardware compatibility:
May be used with all DMX-8
serial numbers.
FTR compatibility: FTR Reporter 5.1 and later.
Important
Note: If you are using FTR Gold 2.2 or TheRecord 3.3, please
contact FTR for required software patch.
Description: MS Certified Windows, Vista and XP driver and
mixer UI. Use this application to change the
configuration of the DMX8 once installed. This will also
install the driver.
WINDOWS 7 (64
bit) and VISTA (64 bit)
Date: 12/10/08
File Name:
DMX8_Vista64_setup7.5.0.exe
File Size: 5.7 Mb Latest
Release
Date: 11/14/08
File Name:
DMX8_Vista64_setup7.0.4.exe
File Size: 5.6 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel 64-bit CPU or equivalent,
2GB RAM
Hardware compatibility: May be used with all DMX-8
serial numbers.
FTR compatibility: TBA
Description: MS Certified Windows 7, Vista driver and mixer UI. Use this application to change the
configuration of the DMX8 once installed. This will also
install the driver.
XP (32 bit)
Date: 10/03/05
File Name: setup3.05.exe
File Size: 6.5 Mb
Certification status: MS Certified
Hardware compatibility: May only be used with DMX-8
serial numbers 248700002759 and lower.
FTR compatibility: FTR Gold 2.2, FTR TheRecord 3.3
Description: MS Certified XP driver and mixer UI. Use this application to change the
configuration of the DMX8 once installed. This will also
install the driver.
Important Note: An FTR patch is required for FTR Gold
2.2. Contact FTR for this patch.
DMX-4 USB MIXER
Driver and Application (Antex &
FTR compatible)
WINDOWS 7 (32
bit), VISTA (32 bit, and XP
(32 bit)
Date: 02/05/09
File Name:
DMX4_VistaXP32_setup2.5.1.exe File Size: 5.8 Mb
Latest Release
Date: 12/10/08
File Name:
DMX4_VistaXP32_setup2.5.0.exe
File Size: 5.8 Mb
Date: 11/14/08
File Name:
DMX4_VistaXP32_setup2.0.4.exe
File Size: 5.6 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel Pentium 4 CPU 2.8 GHz or
equivalent, 1GB RAM
FTR compatibility: FTR Reporter 5.1 and later.
Important
Notes:
1. If you are using FTR Gold 2.2 or TheRecord 3.3, please
contact FTR for required software patch.
2.
If using XP, please download and install
DotNet Framework 2.0 before installing DMX-4 driver and
application
Description: MS Certified Windows 7, Vista and XP driver and
mixer UI. Use this application to change the
configuration of the DMX4 once installed. This will also
install the driver.
WINDOWS 7 (64 bit) and
VISTA (64 bit)
Date: 12/10/08
File Name:
DMX4_Vista64_setup2.5.0.exe
File Size: 5.8 Mb
Latest Release
Date: 11/14/08
File Name:
DMX4_Vista64_setup2.0.4.exe
File Size: 5.6 Mb
Certification status: MS Certified
Minimum CPU requirement: Intel 64-bit CPU or equivalent,
2GB RAM
FTR compatibility: TBA
Description: MS Certified Windows 7, Vista driver and mixer UI. Use this application to change the
configuration of the DMX4 once installed. This will also
install the driver.
____________________________________________________________________________
XM-100: XM Single
Zone Commercial Satellite Radio
Product Photo
Owners Manual
(.htm)
Owners
manual (.pdf)
Data Sheet (.pdf)
RS232 Command
Spec (.pdf)
Force Tune Events
Setup Instructions (.pdf)
Force Tune Events Program
Force Tune Events Program
Software Development kit
Crestron
Module by Control Works
IR Codes
Front and Rear Panel Drawings
Antenna Aiming
RS232 Command Spec (.pdf)
Data Sheet (.pdf)
Users Manual (.pdf)
Crestron
Module by Control Works
IR Codes
Front and Rear Panel Drawings
Antenna Aiming
RS232 Command Spec
Users Manual (.pdf)
Data Sheet (.pdf)
Crestron
Module by Control Works
Crestron Module
IR Codes
Front and Rear Panel Drawings
Antenna Aiming
____________________________________________________________________________
Antex Soundcard Legacy Audio
Drivers
Windows NT/2000/XP
Support: All Current Antex Cards under Win NT4.0, 2000
and XP.
File:
drvntv1140-x86.exe (824k) (FTR
users, use this driver!)
Bloomberg:
drvntv1150-x86.exe (826k)
Windows 95/98/ME
Support: All Antex PCI Cards and these ISA Cards SX-5e,
SX-6, SX-34, SX-35 and SX-36.
File:
drv95v5090.exe
(429k)
Support:
SX-3, SX-7, SX-9, SX-12a, SX-20, SX-22,
SX-23e, SX-33 and Z1e.
File:
95drv400g2.exe
Antex Soundcard WDM Audio
Drivers
NOTES:
This driver is for Windows 2000/XP
ONLY! There is no MIDI Support with this driver. FTR users do NOT use this driver.
Application Software is embedded within this file.
- Support:
StudioCard AV-Pro, SC-2000, SC-22, LX-44
and BX-12.
File:
WDMv187 (710k)
Misc. Sound Card Info
Important
Notice to all Audio Card Users EOL
Special LX-44 Pricing, Call 1-800-338-4231 x25
Beginning April 30, 2005, non-warranty sound card customer assistance via
Antex Technical Support phone and email will be available at
an hourly rate. All requests for technical phone assistance
must first be made via email to
support. The email request should include a
brief synopsis of the support issue, the Antex product
involved, contact information (direct phone/email) for
response, and credit card information so that billable hour(s)
may be charged. All phone support will be subject to a charge
of $50.00 per hour or any part of an hour. Any issues that
can be dealt with solely via email will be handled accordingly
at no charge. Email requests at
support will be checked periodically throughout
the day, M-F 7am-4:30pm PST; a response will be made within
one (1) business day. Emergency support requests are
available by calling Antex Technical support’s hotline at
310-532-3092 x18. All callers will be requested to leave a
message including information regarding the support issue,
product involved, contact information, and credit card billing
information. Messages will be checked regularly throughout
the day and responded to the same day, and usually within 3
hours from the time the message was created. There
is no technical support available
weeknights after 5pm PST or on weekends.
"Antex no longer provides soundcard drivers and
application disks with each soundcard shipment. Please refer
to the list below for the appropriate
driver to match your soundcard model and system
O/S. Should you have any questions, please contact Antex
support
|
