Installing Antex WDM Drivers

1. Download and properly unzip the Antex WDM Driver.
   
   
2. Save this folder in a known location.
   
   
3. Turn OFF your PC and install your Antex Audio Adapter and make sure you secure it properly.
   
   
4. Turn ON your PC and the Found New Hardware Wizard will begin.
   
   
   
5. Shortly followed by this window. Select Install from a list or specific location (Advanced) and then click Next>.
   
   
   
6. Select Search for best driver in these locations and then you may click on Browse to tell Windows where you unzipped the Antex WDM Drivers.
   
   
   
7. Once you have indicated the path it will search for this driver.
   
   
   
8. Once found it will ask you what number of Antex card you want this to be. Normally you will select the Adapter 1, but if you are installing more that one Antex Card in this system, you would select the number of adapter that corresponds to the card you are currently installing. After you have selected the proper Adapter, click Next>.
   
   
   
9. You will then see the files been transferred.
   
   
   
10. You will see this Microsoft Notification, click Continue Anyway.
    
    
    
11. Continues transferring files.
    
    
    
12. Click Finish to complete this installation.